Autotune in Logic Pro X

How to Use Auto-Tune in Logic Pro X (Easy Guide)

Building your repertoire of sounds is a significant step to becoming a well-balanced digital artist in the music industry.

You may utilize Logic Pro X’s wealth of tools to produce original sounds, but doing so can sometimes be complicated.

How to Use Auto-Tune in Logic Pro X

You can utilize the stock Pitch Correction and Flex Pitch functionality in Logic Pro X to partially auto-tune vocals.

Install the plugin onto the track’s channel strip if you wish to auto-tune it.

Third-party auto-tuning software solutions provide more precise control over the process if you want.

Although Logic Pro X has a lot to learn, you’ll be producing music like a pro once you get the hang of it.

The rest of this article will give you a beginner’s guide to using auto-tune in Logic Pro X.

How to Use The Pitch Correction Tool

The auto-tune program that is included in Logic Pro X is called Pitch Correction.

As a stock program, it lacks the precision of other tune systems, but more later.

How to Use Auto-Tune in Logic Pro X
Pitch Correction in Logic Pro X

It’s still an excellent resource for automatic pitch adjustment on your vocal track.

Pitch Correction is required to clean up notes and vocals in many circumstances.

To use pitch correction, follow these five steps:

Step 1

In Logic Pro X, open the project you want to auto-tune.

Open project in Logic Pro X

Step 2

To access the mixer view, press X; the channel strip will appear on the left side of the screen.

Step 3

Select one of the open plugin slots on the Audio FX strip.

Step 4

Select Pitch, followed by Pitch Correction.

Pitch Correction Plug In In Logic Pro X

Step 5

Choose Stereo or Dual Mono: both are useful for different types of recording, but stereo is generally more widespread.

Pitch Correction Stereo In Logic Pro X

Pitch Correction is now enabled on the track.

If installed correctly, you can manage this plugin from the channel strip.

If you don’t see it on the channel strip, double-click the channel slot to bring it up, where you may access the toolbar to make changes.

You may change the settings from the Pitch Correction panel, such as how aggressively you want the plugin to correct notes.

You must set the root and scale so that the plugin understands what key your music is in.

This information is quite useful for editing notes.

How to Use Flex Pitch Logic Pro X

Flex pitch is another helpful resource to fine-tune notes in Logic Pro X.

It’s not “auto” tuning since you’ll need to adjust each note manually.

Still, it gives you significant control over your project, which is always an appreciable addition to a program.

To use Flex Pitch, you’ll need to turn the feature on and manually adjust the notes you want to tweak.

It’s a great resource if you don’t want your entire project to have that metallic auto-tune tone but still need some pitch correction in areas.

To use Flex Pitch, follow these steps:

Flex pitch in Logic Pro
Flex pitch in Logic Pro
  1. Open your Logic Pro X project in which you want to use Flex Pitch.
  2. Select the Flex icon along the top toolbar. It looks like an hourglass lying on its side.
  3. Select Flex Pitch (which has the same corresponding symbol) upon opening the window.
  4. Choose the Flex icon in the track window.
Turn on Flex in Logic Pro

Done correctly, Logic will scan the vocal track and display a wavelength note by note.

You can then go through the song and adjust any individual notes, dragging them up or down to adjust the Pitch.

Doing so simply selects the off-pitch tone and moves it up or down to the correct note.

Other Programs to Consider

Both of these tools are immensely useful for polishing up your vocal performance tracks, and each has a different utility that you can experiment with to find the right sound.

Both plugins are relatively basic and don’t offer the same level of control as higher-quality programs.

If you’re willing to spend out for the best of the best, then you might choose one of these two add-ons:

Auto-tune Pro

One of the most well-known programs in the world of auto-tune, Antares Auto-tune Pro is an excellent resource for advanced auto-tuning.

Once installed, your Mac should recognize it as a plugin that you can install onto a track using the same method as the stock auto-tune plugin.

The pro, however, has a much more comprehensive range of functions.

You can use it in real-time to shift Pitch, apply auto-tune to the recorded audio, and manually correct pitch mistakes.

To get the most out of it, follow these steps:

  • Select input type from the list: soprano, alto/tenor, low male, instrument, and bass instrument.
  • Select your key and scale to fine-tune the pitch correction
  • Select between auto and graph mode. Auto tidies up notes according to your preset specifications, while graph gives you precise control over particular sections to auto-tune manually.
  • Adjust formant and throat. These settings can dynamically change the voice to a different pitch or transpose the track. The effect is striking, so use these features scarcely.
  • Adjust tracking as needed. Tracking adjusts the sensitivity of the auto-tune.

Melodyne

You can incorporate Melodyne’s auto-tune features into your vocal tracks by selecting the track you want and putting Melodyne (ARA) into the first slow of the channel list.

Press play to start communications between Logic Pro X and Melodyne.

Once done, you’ll have access to all the notes of the track that you can dynamically adjust through Melodyne.

Final Thoughts

Several plugins, some of which require additional input cost, can be used to auto-tune in Logic Pro X.

Whether you want to parse through individual notes to tidy them up a little or add a layer of shine to your vocals, there’s so much you can do to brighten up your song with auto-tune.

Have Questions? We Have Answers.

Absolutely! Antares Auto-Tune and Logic Pro are the perfect pair if you’re looking to add a touch of vocal magic to your audio recordings.

To get started, install the Antares plug-in into your Logic Pro setup and then add it as a delightful effect to your audio file.

With the plug-in in place, you can tweak and fine-tune the settings to your heart’s content and use it to bring out the best in your vocalist’s pitch.

The result? Audio recordings are as smooth as silk and filled with musical magic.

The decision of where to place autotune in the audio production process is subjective and dependent on your desired effect.

The conventional method is to have EQ follow autotune to maintain the accuracy of the autotune’s alterations.

However, if you’re daring and want to try something different, experiment with placing autotune before EQ.

References

https://helpcenter.celemony.com/M5/doc/melodyneStudio5/en/M5tour_LogicARA_InsertVorbereitungen?env=logic

Similar Posts

Leave a Reply

Your email address will not be published. Required fields are marked *